CNC-CL-4X4

$3,999.99

[Industrial Grade Flagship CNC] The CL-4×4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, and 12mm b

SKU: CNC-CL-4X4 Category:

Description

FoxAlien [2023 New] CNC Router Machine CL-4×4[Industrial Grade Flagship CNC] The CL-4×4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, and 12mm ball screws on the z-axis. [Most Powerful Closed Loop Stepper Motors] The CL-4×4 comes with four Nema23(60-100) closed loop steppers. These four stepper motors have up to 3.5Nm torque, which has a 60% improvement when compared to the Vasto XXL and a 10% improvement when compared with the CL-6560. [Fast Moving Speed] It is really important to have a fast-moving speed for a full-size CNC machine. Due to the high efficiency of the closed loop motors, the CL-4×4’s max moving speed can reach 5000mm/min. This is 2.5 times faster than the Vasto XXL. [Largest Working Area & Offline Control] The CL-4×4 has up to 122cm x 122cm x 10cm/ 48” x 48” x 3.94”(XYZ) working area, it can fit standard full-sized sheets without cutting them. Build in a 2.4-inch touchscreen on the controller box. This can control the machine without connecting to a PC. [Easy Installation] The CL-4×4 will be shipped with 6 boxes. The main parts are pre-assembled, it just takes 30-45 minutes to assemble the machine, and then you can explore the journey of CNC machining. Description The CL-4×4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, 12mm ball screws on the z axis & the most powerful closed loop stepper motors. It has up to 122cm x 122cm x 10cm/ 48” x 48” x 3.94”(XYZ) working area, and it can fit standard full-sized sheets without cutting them. Specification Working Table: T-slot Hybrid Table Cutting Area XYZ: 122cm x 122cm x 10cm/ 48” x 48” x 3.94” Spindle: 400W Router: Support 65mm and 69 Router, Makita RT0700C and DeWalt DWP611 X Axis: 16mm Ball Screws & Linear Rails Y-Axis: 16mm Ball Screws & Linear Rails Z-Axis: 12mm Ball Screws & Linear Rails Stepper Motors: Nema23(60-100) Close Loop Stepper Motor Torque: 3.5Nm Independent Driver: DM542 Machine Structure Material: All Metal Package List 1x CNC router CL-4×4 (half-assembled in 6 boxes) 1x T-slot Hybrid Table 1x Controller 2x Set of engraving bits (10pcs/set) 1x USB cable 1x Power cord 1x Box of screws and tools 1x User manual 52mm & 65mm & 69mm spindle holder